Distillation Chemical Steam Compressor 3T/H 2 Stage Centrifugal Compressor
Distillation Chemical Steam Compressor
,Chemical Steam Compressor 3T/H
,3T/H 2 Stage Centrifugal Compressor
This fully customized distillation chemical system utilizes a steam compressor for a 3T/H two-stage series deamination distillation process. The system features:
- Inlet steam temperature: 85°C
- Inlet steam pressure: 57.8 Kpa
- Exhaust temperature: 115°C
- Exhaust pressure: 170 Kpa
- Installed power: 300 kW
- Power consumption per ton of steam: 65 kW·h
Gear speed integrated multi-stage compressor with imported guide vane pre-rotation, automatic control, and constant back pressure with adjustable air volume range of 70%~100%, designed for process gas compression.
- Imported guide vane automatic constant pressure control air volume
- Remote monitoring service with automatic control
- 70%~100% adjustable air volume
- Automatic anti-surge protection
- Compact structure and easy maintenance
- Oil-free compressed air with stable pressure and low noise
- Customization services according to customer requirements
Compared to other evaporator types, MVR evaporators offer the lowest energy consumption, small footprint, minimal impact on product quality, simple control system, and high stability.
| Type | Single Effect Evaporator | Multi-effect Evaporator | MVR Evaporator |
|---|---|---|---|
| Energy Consumption | High energy consumption, theoretically 1 ton of steam required to evaporate 1 ton of water | More energy-efficient, with energy consumption decreasing as efficiency increases | Most energy-efficient technology currently available, requiring only 15-50 kW·h of electricity to evaporate each ton of water |
| Floor Area | Small | Large | Small |
| Impact on Product Quality | Short dwell time but high temperature, with minimal impact on product quality | Long dwell time and high temperature, with minimal impact on product quality | Short residence time, evaporation due to temperature difference, minimal impact on product quality |
| Energy Mode | Requires steam heating, steam pipeline network, and boiler | Requires steam heating, steam pipeline network, and boiler | Electricity only, no steam pipe network required, fully self-closing circulation system |
| Operating Cost | High | Higher | Low |
| Stability | Poor | Poor | Good |
Two Stage Steam Compressor Mechanical Vapor Recompression MVR Compressor
Kompresor uap dua tahap yang sepenuhnya disesuaikan untuk lingkungan kimia ekstrem. Dilengkapi bantalan motor tahan ledakan, kontrol frekuensi variabel cerdas, dan efisiensi energi serendah 20-40 kWh/t air. Mendukung respons cepat 7×24 jam dan pemeliharaan modular untuk sistem pemulihan amonia.
Industrial MVR Steam Compressor 3T/H Two Stage Mechanical Vapour Recompression
Kompresor uap industri untuk bidang kimia/farmasi/lingkungan. Dilengkapi kompresi dua tahap, berpendingin air, pengoperasian dengan kebisingan rendah, pemulihan amonia yang efisien. Konsumsi energi serendah 20-40 kWh/t air. Volume udara yang dapat disesuaikan 70%-100%, udara bertekanan bebas oli, perlindungan anti-lonjakan otomatis. Layanan OEM disediakan dengan sertifikasi penuh.
6T/H Steam Compressor Heat Pump System MVR Single Stage Centrifugal Compressor
Sistem pompa panas tunggal/dua tahap 6T/H bersertifikasi penuh dengan motor kecepatan tinggi maglev. Dilengkapi katup tahan ledakan, volume udara yang dapat disesuaikan 70-100%, kompresi bebas oli, dan pemantauan jarak jauh. Layanan OEM khusus dengan konsumsi uap rendah 4kw*h per ton.
54T/H Two Stage MVR Heat Pump Distillation System With Steam Compressor
Sistem distilasi pompa panas dua tahap 54T/Jam yang sepenuhnya disesuaikan dengan kompresor uap. Dilengkapi katup anti-lonjakan tahan ledakan, volume udara yang dapat disesuaikan 70-100%, pemantauan jarak jauh, dan udara bertekanan bebas oli. Tersertifikasi dengan layanan OEM, konsumsi uap rendah 10kw*h, dan teknologi MVR hemat energi.
