Distillation Chemical Steam Compressor 3T/H 2 Stage Centrifugal Compressor
Distillation Chemical Steam Compressor
,Chemical Steam Compressor 3T/H
,3T/H 2 Stage Centrifugal Compressor
This fully customized distillation chemical system utilizes a steam compressor for a 3T/H two-stage series deamination distillation process. The system features:
- Inlet steam temperature: 85°C
- Inlet steam pressure: 57.8 Kpa
- Exhaust temperature: 115°C
- Exhaust pressure: 170 Kpa
- Installed power: 300 kW
- Power consumption per ton of steam: 65 kW·h
Gear speed integrated multi-stage compressor with imported guide vane pre-rotation, automatic control, and constant back pressure with adjustable air volume range of 70%~100%, designed for process gas compression.
- Imported guide vane automatic constant pressure control air volume
- Remote monitoring service with automatic control
- 70%~100% adjustable air volume
- Automatic anti-surge protection
- Compact structure and easy maintenance
- Oil-free compressed air with stable pressure and low noise
- Customization services according to customer requirements
Compared to other evaporator types, MVR evaporators offer the lowest energy consumption, small footprint, minimal impact on product quality, simple control system, and high stability.
| Type | Single Effect Evaporator | Multi-effect Evaporator | MVR Evaporator |
|---|---|---|---|
| Energy Consumption | High energy consumption, theoretically 1 ton of steam required to evaporate 1 ton of water | More energy-efficient, with energy consumption decreasing as efficiency increases | Most energy-efficient technology currently available, requiring only 15-50 kW·h of electricity to evaporate each ton of water |
| Floor Area | Small | Large | Small |
| Impact on Product Quality | Short dwell time but high temperature, with minimal impact on product quality | Long dwell time and high temperature, with minimal impact on product quality | Short residence time, evaporation due to temperature difference, minimal impact on product quality |
| Energy Mode | Requires steam heating, steam pipeline network, and boiler | Requires steam heating, steam pipeline network, and boiler | Electricity only, no steam pipe network required, fully self-closing circulation system |
| Operating Cost | High | Higher | Low |
| Stability | Poor | Poor | Good |
Two Stage Steam Compressor Mechanical Vapor Recompression MVR Compressor
Fully customized two-stage steam compressor for extreme chemical environments. Features explosion-proof motor bearing, intelligent variable frequency control, and energy efficiency as low as 20-40 kWh/t water. Supports 7×24 hour rapid response and modular maintenance for ammonia recovery systems.
Industrial MVR Steam Compressor 3T/H Two Stage Mechanical Vapour Recompression
Industrial steam compressor for chemical/pharmaceutical/environmental fields. Features two-stage compression, water-cooled, low-noise operation, efficient ammonia recovery. Energy consumption as low as 20-40 kWh/t water. Customizable air volume 70%-100%, oil-free compressed air, automatic anti-surge protection. OEM services provided with full certification.
6T/H Steam Compressor Heat Pump System MVR Single Stage Centrifugal Compressor
Fully certified 6T/H single/two-stage heat pump system with maglev high-speed motor. Features explosion-proof valves, 70-100% adjustable air volume, oil-free compression, and remote monitoring. Custom OEM services with low 4kw*h steam consumption per ton.
54T/H Two Stage MVR Heat Pump Distillation System With Steam Compressor
Fully customized 54T/H two-stage heat pump distillation system with steam compressor. Features explosion-proof anti-surge valves, 70-100% adjustable air volume, remote monitoring, and oil-free compressed air. Certified with OEM services, low 10kw*h steam consumption, and energy-efficient MVR technology.
