6T/H Steam Compressor Heat Pump System MVR Single Stage Centrifugal Compressor
6T/H Steam Compressor Heat Pump
,Steam Compressor Heat Pump System MVR
,MVR Single Stage Centrifugal Compressor
Technical Specifications:
• Inlet Steam Temperature: 35.5/29 ℃
• Inlet Pressure: 0.186/0.145 MPa
• Exhaust Temperature: 46/43.5 ℃
• Exhaust Pressure: 0.26/0.24 MPa
• Medium: R1233ZD
• Installed Power: 40 kW
• Single Ton Steam Consumption: 4 kW·h
- Gear speed integrated multi-stage compressor with imported guide vane pre-rotation
- Automatic control with constant back pressure
- Adjustable air volume range of 70% to 100%
- Designed for process gas compression applications
- Automatic anti-surge protection system
- Compact structure for easy maintenance
- Oil-free compressed air delivery with stable pressure and low noise
- Remote monitoring service with automatic control
- Customization services available according to customer requirements
| Parameter | Single Effect Evaporator | Multi-Effect Evaporator | MVR Evaporator |
|---|---|---|---|
| Energy Consumption | High energy consumption, theoretically 1 ton of steam required to evaporate 1 ton of water | More energy-efficient, consumption decreases with efficiency increases | Most energy-efficient technology, requires only 15-50 kW·h electricity per ton of water |
| Floor Area | Small | Large | Small |
| Impact on Product Quality | Short dwell time, high temperature, minimal impact | Long dwell time, high temperature, minimal impact | Short residence time, evaporation due to temperature difference, minimal impact |
| Energy Mode | Requires steam heating, steam pipeline network and boiler | Requires steam heating, steam pipeline network and boiler | Electricity only, no steam pipe network required, fully self-closing circulation system |
| Operating Cost | High | Higher | Low |
| Stability | Poor | Poor | Good |
Two Stage Steam Compressor Mechanical Vapor Recompression MVR Compressor
Kompresor uap dua tahap yang sepenuhnya disesuaikan untuk lingkungan kimia ekstrem. Dilengkapi bantalan motor tahan ledakan, kontrol frekuensi variabel cerdas, dan efisiensi energi serendah 20-40 kWh/t air. Mendukung respons cepat 7×24 jam dan pemeliharaan modular untuk sistem pemulihan amonia.
Industrial MVR Steam Compressor 3T/H Two Stage Mechanical Vapour Recompression
Kompresor uap industri untuk bidang kimia/farmasi/lingkungan. Dilengkapi kompresi dua tahap, berpendingin air, pengoperasian dengan kebisingan rendah, pemulihan amonia yang efisien. Konsumsi energi serendah 20-40 kWh/t air. Volume udara yang dapat disesuaikan 70%-100%, udara bertekanan bebas oli, perlindungan anti-lonjakan otomatis. Layanan OEM disediakan dengan sertifikasi penuh.
54T/H Two Stage MVR Heat Pump Distillation System With Steam Compressor
Sistem distilasi pompa panas dua tahap 54T/Jam yang sepenuhnya disesuaikan dengan kompresor uap. Dilengkapi katup anti-lonjakan tahan ledakan, volume udara yang dapat disesuaikan 70-100%, pemantauan jarak jauh, dan udara bertekanan bebas oli. Tersertifikasi dengan layanan OEM, konsumsi uap rendah 10kw*h, dan teknologi MVR hemat energi.
3T/H Multi Stage Centrifugal Compressor Lubricated MVR Evaporator System
Kompresor uap yang sepenuhnya disesuaikan untuk sistem penguapan kilat air panas dua tahap 3T/JAM. Dilengkapi desain multi-tahap terintegrasi kecepatan roda gigi, kontrol baling-baling pemandu yang diimpor, volume udara yang dapat disesuaikan 70%-100%, perlindungan anti-lonjakan, udara bertekanan bebas oli, dan pemantauan jarak jauh. Menawarkan layanan OEM, sertifikasi, dan teknologi MVR dengan konsumsi energi rendah.
