3T/H Multi Stage Centrifugal Compressor Lubricated MVR Evaporator System
3T/H Multi Stage Centrifugal Compressor
,Lubricated MVR Evaporator System
,Multi Stage Centrifugal Compressor Lubricated
The fully customized 3T/H two-stage hot water flash evaporation system utilizes a steam compressor with the following specifications:
- Inlet steam temperature: 95°C
- Inlet pressure: 84.6 kPa
- Exhaust temperature: 120°C
- Exhaust pressure: 198.7 kPa
- Installed power: 160 kW
- Single ton steam consumption: 48 kW·h
- Mechanical seal
Gear speed integrated multi-stage compressor with imported guide vane pre-rotation, automatic control, and constant back pressure with adjustable air volume range of 70%~100%, designed for process gas compression.
- Imported guide vane automatic constant pressure control air volume
- Remote monitoring service with automatic control
- 70%~100% adjustable air volume
- Automatic anti-surge protection
- Compact structure and easy maintenance
- Compressed air is oil-free, with stable pressure and low noise
- Customized services according to customer needs
Compared to other types of evaporators, MVR evaporators offer the lowest energy consumption, small footprint, minimal impact on product quality, simple control system, and high stability.
| Type | Single Effect Evaporator | Multi-Effect Evaporator | MVR Evaporator |
|---|---|---|---|
| Energy Consumption | High energy consumption, theoretically 1 ton of steam required to evaporate 1 ton of water | More energy-efficient, energy consumption decreases with efficiency increases | Most energy-efficient technology, requires only 15-50 kW·h of electricity per ton of water |
| Floor Area | Small | Large | Small |
| Impact on Product Quality | Short dwell time, high temperature, minimal impact | Long dwell time, high temperature, minimal impact | Short residence time, evaporation due to temperature difference, minimal impact |
| Energy Mode | Steam heating requiring steam pipeline network and boiler | Steam heating requiring steam pipeline network and boiler | Electricity only, no steam pipe network required, fully self-closing circulation system |
| Operating Cost | High | Higher | Low |
| Stability | Poor | Poor | Good |
Two Stage Steam Compressor Mechanical Vapor Recompression MVR Compressor
Fully customized two-stage steam compressor for extreme chemical environments. Features explosion-proof motor bearing, intelligent variable frequency control, and energy efficiency as low as 20-40 kWh/t water. Supports 7×24 hour rapid response and modular maintenance for ammonia recovery systems.
Industrial MVR Steam Compressor 3T/H Two Stage Mechanical Vapour Recompression
Industrial steam compressor for chemical/pharmaceutical/environmental fields. Features two-stage compression, water-cooled, low-noise operation, efficient ammonia recovery. Energy consumption as low as 20-40 kWh/t water. Customizable air volume 70%-100%, oil-free compressed air, automatic anti-surge protection. OEM services provided with full certification.
6T/H Steam Compressor Heat Pump System MVR Single Stage Centrifugal Compressor
Fully certified 6T/H single/two-stage heat pump system with maglev high-speed motor. Features explosion-proof valves, 70-100% adjustable air volume, oil-free compression, and remote monitoring. Custom OEM services with low 4kw*h steam consumption per ton.
54T/H Two Stage MVR Heat Pump Distillation System With Steam Compressor
Fully customized 54T/H two-stage heat pump distillation system with steam compressor. Features explosion-proof anti-surge valves, 70-100% adjustable air volume, remote monitoring, and oil-free compressed air. Certified with OEM services, low 10kw*h steam consumption, and energy-efficient MVR technology.
